✖
Status
Item
Caption
make
line
model
code
1
Dr. Ing. h.c. F. Porsche AG
 Image
During the fitting of pre-assembled doors, a handling device bears the main load
Porsche 911 Carrera 996 I
2
Dr. Ing. h.c. F. Porsche AG
 Image
The cockpit is prepared for installation on a separate assembly belt
Porsche
3
Dr. Ing. h.c. F. Porsche AG
 Image
Boxster S in the "seat assembly" production phase
Porsche 718 Boxster S 986 I
4
Dr. Ing. h.c. F. Porsche AG
 Image
All vehicles are checked for leaks in a rain test
Porsche 911 Carrera 996 I
5
Dr. Ing. h.c. F. Porsche AG
 Image
All vehicles are checked for leaks in a rain test
Porsche 911 Carrera 996 I
6
Dr. Ing. h.c. F. Porsche AG
 Image
Before the cars leave production, the paintwork is checked again in the light tunnel
Porsche 911 Turbo 996 I
7
Dr. Ing. h.c. F. Porsche AG
 Image
Welding of front end
8
Dr. Ing. h.c. F. Porsche AG
 Image
The seat carriers are connected to the vehicle floor by spot-welding
9
Dr. Ing. h.c. F. Porsche AG
 Image
Side section production of the 911 Turbo
Porsche 911 Turbo 996 I
10
Dr. Ing. h.c. F. Porsche AG
 Image
Before the floorpan and the side sections are welded together, they are connected loosely in the clip station
Porsche 911 Turbo 996 I
11
Dr. Ing. h.c. F. Porsche AG
 Image
Welding of the Boxster floorpan
Porsche 718 Boxster 986 I
12
Dr. Ing. h.c. F. Porsche AG
 Image
Before welding, the clamping frame holds the side sections and the floorpan in position
Porsche 911 996 I
13
Dr. Ing. h.c. F. Porsche AG
 Image
Side sections and floorpan of the Boxster are welded
Porsche 718 Boxster 986 I
14
Dr. Ing. h.c. F. Porsche AG
 Image
After the welding of the floorpan with the side sections, laser sensors ensure that the correct dimensions are observed
Porsche 718 Boxster 986 I
15
Dr. Ing. h.c. F. Porsche AG
 Image
MAG welding on the B-pillar of the Boxster
Porsche 718 Boxster 986 I
16
Dr. Ing. h.c. F. Porsche AG
 Image
Final welding work on the body of the 911 Turbo
Porsche 911 Turbo 996 I
17
Dr. Ing. h.c. F. Porsche AG
 Image
A robot welds fastening elements (bolts) required e.g. for wiring harnesses
Porsche
18
Dr. Ing. h.c. F. Porsche AG
 Image
MAG welding of the rear cross member in the 911 Carrera Cabriolet
Porsche 911 Carrera Cabriolet 996 I
19
Dr. Ing. h.c. F. Porsche AG
 Image
Testing the windscreen opening with a gauge
Porsche
20
Dr. Ing. h.c. F. Porsche AG
 Image
In a 3D measuring station, it is checked whether the prescribed body dimensions have been observed
Porsche